Testing instruments
SMC-100 Spark Tester
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
SMC-100 Spark Tester
The SMC-100 Spark Tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3 and 30mm can be tested.
It can be widely used for testing butt-welded and overlap joints in the plastics & rubber, petro-chemical and pipeline construction industries.
A flexible probe is included with the unit but additional insulated extension rods and electrodes can be supplied, if required, for specific applications. However, to ensure the stability of the output voltage, large electrodes should not be used. The recommended maximum size is 150mm
Features
• Lightweight & ergonomically designed
• Mains powered
• Adjustable output voltage
• Power limited output for operator safety
• Coating thickness of between 3-30mm can be tested
COUPON CUTTER
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
COUPON CUTTER
•Robust design, tried and tested on building sites
•Extra long lever for ergonomic and efficient handling
•Extensive scope of supply
The Simon COUPON CUTTER is a weld test punch proven on building sites for peel, shear and tensile testing. It is ideal in combination with one of the two tensile test tools EXAMO 300 USB or EXAMO 600 USB. That gives you perfect control over the quality of the welded membrane liners at all times. The strong leverage eff ect ensures easy handling and perfect cutting results.
Specifications
COUPON CUTTER 150 x 20 mm (6“ x 0.8“)
Air pressure test manometer with testing needle
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
Air pressure test manometer with testing needle
•Easy and precise seam testing
•High security due to hand and needle protection
•Practical storage case
The reliable and handy air pressure test manometer from Simon is the perfect solution for testing the integrity of dual track seams with test channel. It is suitable on construction sites for civil engineering, tunneling and landfills. The revised model is now even more secure – in terms of the daily use and for the detection of leaks.
EXAMO USB
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
EXAMO USB
• Handy, robust and reliable
• Testing of elongation, peak force, tear force, test speed and position
• Construction-site approved
Is the welding seam sealed and can it withstand the specified peeling, tensile and shearing forces? EXAMO performs tests at the construction site – quick, reliable and uncomplicated.
Specifications
EXAMO 300F USB – 230 V / 200 W / EU-plug
Attribute Unit Value
Voltage V~ 230
Power W 200
Tensile load N 4000
Jaw spacing mm 5 – 300
Range mm 300
Test speed mm/min 10 – 300
Sample thickness mm max. 7
Sample width mm max. 40 (60 optional)
USB-memory-stick incl. USB memory stick
Size (L × W × H) mm 750 × 270 × 190 (storage case)
Weight kg 14
Conformity mark CE Certification
VACUUM PUMP
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
VACUUM PUMP
The VACUUM BOX produces a vacuum, generated by air pressure from the VACUUM PUMP. It is placed on a double overlap welding seam for proving its tightness.
Specifications
VACUUM PUMP – 230 V
VACUUM BELL
Simon Machinery (China) Co., Ltd. Email: sales@simon-machinery.com
VACUUM BELL
The VACUUM BELL is used for testing the tightness of double overlap welding seams. The needed vacuum is ideally generated by Simon’s VACUUM PUMP.
Specification
Vacuum bell – ∅320 mm
Simon Machinery (China) Co., Ltd.
Address: NO.8, Sg Industrial Zone,Shantou.Guangdong 515041,China
Tel: 86-754-88315635
Fax: 86-754-88770829
E-mail: sales@simon-machinery.com
Website: www.simon-machinery.com
Website: http://simongroupworld.com